The Long Bob - An Undeniable Staple

The bob never really looses its trend status, it just evolves along with whatever is happening in the fashion world... shorter, longer, sleek, shaggy…and right now the Long Bob is stealing the limelight,” says Andrew Carruthers, Director of Education for Sam Villa.

Bobs can be adapted to compliment nearly any face shape or hair texture. They can be classic, edgy, or quirky, and in spite of their simplicity, they always speak volumes about the personality of the individual. The simplicity that gives the bob its power also makes it one of the most challenging shapes to create. Regardless of whether it is blunt, layered, graduated, tilted forward, tilted back, heavy, or highly texturize, the critically important focal point is the perimeter line. If that line is not flawlessly placed on the head shape and executed with a precision, the impact is lost. Master this iconic design with these 5 tips and tools available on

·       Sam Villa® Signature Series 7” Shear and/or 5.75” Shear

·       Sam Villa® Signature Series Long or Short Cutting Comb – Black for lighter hair, Ivory for darker hair

·       Sam Villa® Light Professional Ionic Dryer with Diffuser

Move:  The single most important design aspect in creating that perfect perimeter line is being sure that it flows with the head shape. That can’t be achieved if feet are cemented to the floor – so move to mirror the changes in the shape of the head. The most common area that goes wrong is where the head shape turns a very strong corner from the back of the head leading to just behind the ear. Most bobs will start in the center back which is where feet should start. When working towards the ear, the head shape turns a very sharp corner (corner back for Redken PBD users). If the body does not mirror that same dramatic change, it will create unwanted over direction in that area and compromise the flow of the perimeter. Practice keeping toes on the same plane as the surface of the head when cutting and move the body often!

Get Low: Elevation is another aspect that can make or break the power of a perimeter.  To keep that edge strong, elevation needs to be as close to natural fall as possible. Getting lower (even eye level) to the perimeter will resist the temptation to elevate the hair, which will cause unwanted graduation. Another way to keep elevation at natural fall is to use a comb to hold the hair rather than fingers. Keep the teeth of the comb toward the head and it will minimize elevation, as the hair will fall out of the comb if accidentally lifted.

Shift Perspective: Shift thoughts of what visually creates the "side" versus "back" of the silhouette. Most are taught to ‘T’-part the head at the ear or mastoid process before cutting which is excellent for breaking the head into manageable areas for cutting. The challenge is that it makes many think the hair in front of the ear makes up the side of the silhouette. Take a few steps back, what the world sees as the side of the head really begins at that pivotal area mentioned earlier at the back corner of the head. This also means that the back of the silhouette is actually a very small area between those corners. AND, make sure you step back from your work often to get a fresh perspective!

Heads Up: Keep the head in its upright and natural position when cutting. This makes sure that the line that is cut is actually the line seen. When guests tip their chin down, perspective on the stylist’s line is lost. The tension on the skin actually changes at the nape as well. Reach back, lay a hand on the back of the neck, and then tip head forward. Notice that the skin right in the center becomes tight and the skin just behind ears becomes loose. When cutting in this position, the line can change when the head returns to natural head position. This rule can be broken during the refinement stage. When the cut is complete and fully blown dried, tip the head forward and to the sides to reveal hairs that pop out when guest moves their head... clean these off following the line originally cut and it will add that perfect finish from any angle.

Pop the Top:  Bobs can be plagued with unbalanced weight distribution between the back and sides. There are an extra few inches of hair beneath the occipital and there is less density in front of the ear. Because this challenge originates below the occipital, clip the hair above this up and out of the way to focus weight removal where it's needed most. Drop the top back down often to see how things are balancing out. If texturizing is not sufficiently addressing the problem and bulk needs to be eliminated, consider under cutting the area. Guests will love how much easier their morning blow dry is without that extra mass weighing them down.

Photo Credits:

Photography - Shalem Mathew
Hair - Geneva Cowen, Artistic Director for Sam Villa
Color - Tina Calzaretta, Sam Villa Support Team
Makeup - Lorina Alailefaleula

More in Home